3/8" Mounting Clamp for 3/8 High Pressure Nylon Tubing

Aluminum and foam rubber clamp wraps snugly around high-pressure nylon tubing. Holes overlap when on tubing and can be attached to surfaces. We recommend at least one clamp per three feet of tubing.  Allows for clean and tight installation from pump...

Drip-Free Misting Nozzle, 1000psi, for 18 inch and 24 Inch Professional Series Misting Fans , Cool Caddies, and Extreme Series with Chrome Rings .008 Orifice

Replacement misting nozzles for Professional series 18 inch and 24 Inch Misting with Chrome Rings, Cool Caddies, and Extreme Series. Features a drip-free mechanism to prevent water from spraying while pressure is below optimum, generally after the pump...

Single Hole Inline Misting Connector (3/8" compression fitting)To be used with 3/8 high pressure nylon hose

This inline misting connector is for use with 3/8" high-pressure nylon tubing and connects by compression. It has one threaded hole for a professional series misting nozzle or a non-misting plug to create your own misting line

Drip-Free Extreme Series Misting Nozzle, 1000 psi, Fits Older Generation HydroMist Extreme Models and All Cool Zone Fans, 12-24UNC, .008 Orifice

Replacement misting nozzles for Older Generation HydroMist Extreme series (2018 and older). Features a drip-free mechanism to prevent water from spraying while pressure is below optimum, generally after the pump is turned off. .008" Orifice 12-24UNC...

Non-Misting Plug

 Plugs are used to replace nozzles on fan rings or mist lines to reduce mist in areas of high humidity.  

Pump/Mist Fan Tubing Adaptor Connector (3/8" compression fitting)

This pump adaptor is for use with 3/8" high-pressure nylon tubing and connects by compression; one end has 3/8" threads. Pump adaptor connectors are used to attach high-pressure nylon hose to a misting pump and misting ring. This fitting comes...

Ball Valve (3/8" compression fitting)

This ball valve is for use with 3/8" high-pressure nylon tubing and connects by compression fittings. It may be placed in-line with the nylon hose at any point of the misting system to provide a shut-off point.

Cool Caddie and 18 inch Professional Series Fan replacement 5 Nozzle Ring-Nozzles Not Included

Replacement 5 nozzle ring for Cool Caddie and all 18 Inch Professional Series Fan Nozzles (f10-08-001) and 3/8 Hose Fitting Adapter(F10-06-002) sold separately Shroud grommet included to prevent fan vibration against fan shroud

3/8 Nozzle Extender

Swivel Nozzle allows for adjusting direction of the mist. Works with F10-08-001 Mist Nozzle.  10-24 Thread

High Pressure 1/4-3/8 Compression Reducer

Reduces size of Tubing 3/8 to 1/4

1/4 Inch Pump Adaptor Compression

Fitting HP 1/44"x 1/4"PTC Used to connect 4 inch 4 nozzle mist ring to 1/4 high pressure tubing

1/4 " Quick Connect for Mist N Go

Easily connect/disconnect 1/4 tubing to Mist N go pump without having to cut tubing.  This is ideal for multiple mist configurations with the same pump.  Example would be mist line for RV and Boat as well at home.