3/8" Mounting Clamp for 3/8 High Pressure Nylon Tubing

Aluminum and foam rubber clamp wraps snugly around high-pressure nylon tubing. Holes overlap when on tubing and can be attached to surfaces. We recommend at least one clamp per three feet of tubing.  Allows for clean and tight installation from pump...

3/8 Nozzle Extender

Swivel Nozzle allows for adjusting direction of the mist. Works with F10-08-001 Mist Nozzle.  10-24 Thread.  Works great to aim direction of mist away from roof lines.

3/8 Stainless Tubing Compression Elbow Fitting

Elbow fitting for 3/8 Stainless Tubing

3/8 Stainless Steel Tubing Compression Fitting End Cap

3/8 High Pressure End Cap Fitting for 3/8 Stainless Tubing

3/8 Stainless Steel Misting Union Fitting 10/24 for 3/8 Stainless Tubing

3/8 Stainless Steel Union Fitting to connect 3/8 High Pressure Stainless Tubing. 

3/8 Stainless Tubing 24 inch Spacing 8 Ft Sections

Stainless Steel Finish Tubing for High Pressure Misting Lines.  Requires Nozzles 10/24 Thread.  4 Nozzles per 8ft Section

3/8 Stainless Tee Compression Fitting for 3/8 Stainless Tubing

High Pressure Stainless Tee Compression Fitting.

3/8" 8 Ft All Stainless Steel Blank Tubing for High Pressure Misting

  Blank Stainless Tubing can be used to transition from high pressure nylon tubing to the mist line for a cleaner, professional look.  The tubing is rigid to handle 1000 PSI but also can be bent using a 3/8 tube bender tool to prevent using...

DIY 8 FT 3/8" Stainless Tube Kit with 25 ft Nylon Tubing, 4 Nozzles and 3/8" Compression Fittings

DIY Stainless Tubing 8 Ft 4 Nozzle Mist Line Kit  Everything you need to add a mist line or mist curtain to any trellis, gazebo or roof overhang that spans 8 feet or more.  Stainless Tubing allows for a neater install w/ less fittings than...