3/8" Nylon Tubing and Compression Fittings

3/8" High-Pressure Nylon Tubing

Black nylon high-pressure tubing for connecting Professional series fans and pumps rated for 1000PSI. Outer diameter of 3/8". Compression fittings are required to connect tubing to components. All Professional series HydroMist fans and pumps come with...

3/8" Mounting Clamp for 3/8 High Pressure Nylon Tubing

Aluminum and foam rubber clamp wraps snugly around high-pressure nylon tubing. Holes overlap when on tubing and can be attached to surfaces. We recommend at least one clamp per three feet of tubing.  Allows for clean and tight installation from pump...

Single Hole Inline Misting Connector (3/8" compression fitting)To be used with 3/8 high pressure nylon hose

This inline misting connector is for use with 3/8" high-pressure nylon tubing and connects by compression. It has one threaded hole for a professional series misting nozzle or a non-misting plug to create your own misting line.  Misting Tee...

Non-Misting Plug

 Plugs are used to replace nozzles on fan rings or mist lines to reduce mist in areas of high humidity.  

Elbow Coupler (3/8" compression fitting)

This elbow coupler is for use with 3/8" high-pressure nylon tubing and connects by compression; there are no threads. Elbow connectors are generally used to bend a hose around a corner or otherwise sharply turn 90 degrees.

Tee Coupler (3/8" compression fitting)

This tee coupler is for use with 3/8" high-pressure nylon tubing and connects by compression; there are no threads. Tee connectors are generally used to branch hoses and connect multiple misting fans to one pump

Pump/Mist Fan Tubing Adaptor Connector (3/8" compression fitting)

This pump adaptor is for use with 3/8" high-pressure nylon tubing and connects by compression; one end has 3/8" threads. Pump adaptor connectors are used to attach high-pressure nylon hose to a misting pump and misting ring. This fitting comes...

3/8 Compression fitting straight union

3/8 Compression Union to be used to connect 3/8 Nylon Tubing

Ball Valve (3/8" compression fitting)

This ball valve is for use with 3/8" high-pressure nylon tubing and connects by compression fittings. It may be placed in-line with the nylon hose at any point of the misting system to provide a shut-off point.

Single Hole End Cap Misting Connector (3/8" compression fitting)

This tee connector is for use with 3/8" high-pressure nylon tubing and connects by compression. End cap connectors are used to terminate the end of a hose. It may have either a misting nozzle or a non-misting plug screwed into the threaded hole. Requires...

3/8 Nozzle Extender

Swivel Nozzle allows for adjusting direction of the mist. Works with F10-08-001 Mist Nozzle.  10-24 Thread.  Works great to aim direction of mist away from roof lines.

High Pressure 1/4"-3/8" Compression Reducer

Reduces size of Tubing 3/8 to 1/4