HydroMist

18 Inch Outdoor Wall Mount Oscillating Fan 3-Speed Control on Motor

Ideal for   Residential and Commercial use 3 Fan Speeds (3500,4200,5100 CFM) Integrated Chrome Fan Guard with   capability to be easily retrofitted for Misting Wall...

Four Fan 24 Inch ProMist 75 Package-1000 PSI

DIY complete setup for a misting fan system. Great for cooling a large-sized porch or restaurant patio. This system is maxed out for nozzles (32 total) and cannot be expanded as-is...

Two Misting Fan Package - 18 Inch, 1000PSI ProMist 35 Pump

DIY complete setup for a misting fan system. Great for cooling a small-sized porch. Expandable up to three 18 inch misting fans total. Easy to self install. Includes: 2 Professional series...

3/8" Mounting Clamp for 3/8 High Pressure Nylon Tubing

Aluminum and foam rubber clamp wraps snugly around high-pressure nylon tubing. Holes overlap when on tubing and can be attached to surfaces. We recommend at least one clamp per three feet of tubing...

Tube Cutter for Nylon High Pressure Hose

Tool for cutting  high-pressure nylon tubing. Designed to assist with cutting tubing squarely. Flush, square cuts are necessary to make sure the tubing fits properly and securely into a...

Heavy Duty 5Ft Garden Hose (125 PSI) to connect pump to water source

Leaving a standard garden hose attached to a misting pump and under pressure for an extended period of time can cause the hose to weaken and burst, especially while the misting system is not in...

Non-Misting Plug

 Plugs are used to replace nozzles on fan rings or mist lines to reduce mist in areas of high humidity.  

Drip-Free Misting Nozzle, 1000psi, for 18 inch and 24 Inch Professional Series Misting Fans , Cool Caddies, and Extreme Series with Chrome Rings .008 Orifice

Replacement misting nozzles for Professional series 18 inch and 24 Inch Misting with Chrome Rings, Cool Caddies, and Extreme Series. Features a drip-free mechanism to prevent water from spraying...

Ball Valve (3/8" compression fitting)

This ball valve is for use with 3/8" high-pressure nylon tubing and connects by compression fittings. It may be placed in-line with the nylon hose at any point of the misting system to provide a...

Pump/Mist Fan Tubing Adaptor Connector (3/8" compression fitting)

This pump adaptor is for use with 3/8" high-pressure nylon tubing and connects by compression; one end has 3/8" threads. Pump adaptor connectors are used to attach high-pressure nylon hose to a...

Single Hole End Cap Misting Connector (3/8" compression fitting)

This tee connector is for use with 3/8" high-pressure nylon tubing and connects by compression. End cap connectors are used to terminate the end of a hose. It may have either a misting nozzle or a...

Elbow Coupler (3/8" compression fitting)

This elbow coupler is for use with 3/8" high-pressure nylon tubing and connects by compression; there are no threads. Elbow connectors are generally used to bend a hose around a corner or otherwise...