Product Description

Misting Tee Coupler 1/4" Compression Fitting for DIY Misting Line with Nylon Tubing

1/4" Inline Misting Fitting is used to created a misting line. The fitting is attached by inserting the 1/4 high pressure tubing on both ends.  A 10-24 thread nozzle is required to screw into each inline fitting.  Typically they are spaced every 18 to 25 inches depending on the humidity where installed.  1/4 inch fittings are used with the Mist N Go or any other high pressure pump using 1/4 nylon tubing