Tubing, Fittings, Rings & Nozzles

Single Hole End Cap Misting Connector (3/8" compression fitting)

This tee connector is for use with 3/8" high-pressure nylon tubing and connects by compression. End cap connectors are used to terminate the end of a hose. It may have either a misting nozzle or a non-misting plug screwed into the threaded hole. Requires...

3/8 Nozzle Extender

Swivel Nozzle allows for adjusting direction of the mist. Works with F10-08-001 Mist Nozzle.  10-24 Thread.  Works great to aim direction of mist away from roof lines.

High Pressure 1/4"-3/8" Compression Reducer

Reduces size of Tubing 3/8 to 1/4

Calcium Filter & Hose Saver Bundle

This combo works perfectly to aid in the installation of the calcium filter with no fear of kinking the hose or stressing the inlets or outlets Calcium Filter (F10-15-004) helps keep nozzles free from buildup and clogging in hard water conditions Hose...

Replacement Ring for 24" Professional Series Misting Fans

Nozzles(F10-08-001) and 3/8 Hose Fitting/adaptor (10-06-002)not included   Chrome Rubber Grommet included to prevent fan vibration on metal shroud

Tee Coupler (1/4" compression fitting)

This tee coupler is for use with 1/4" high-pressure nylon tubing and connects by compression; there are no threads 1/4 inch Misting Tee used to install multiple mist lines or fans to one pump   Used on all Mist N Go Products or other systems that...

1/4 Inch Misting End Cap

Misting End Cap 1/4" Compression Fitting for DIY Misting Line with Nylon Tubing 1/4"misting end cap is used to created a misting line. The fitting is attached by inserting the tubing at the end of the mist line.  A 10-24 Thread Nozzle is required...

Misting Tee Coupler 1/4" Compression Fitting for DIY Misting Line with Nylon Tubing

1/4" Inline Misting Fitting is used to created a misting line. The fitting is attached by inserting the 1/4 high pressure tubing on both ends.  A 10-24 thread nozzle is required to screw into each inline fitting.  Typically they are spaced...

Tube Cutter for Nylon High Pressure Hose

Tool for cutting  high-pressure nylon tubing. Designed to assist with cutting tubing squarely. Flush, square cuts are necessary to make sure the tubing fits properly and securely into a compression fitting. Spring assisted open. Can be locked closed...

3/8 Stainless Tubing Compression Elbow Fitting

Elbow fitting for 3/8 Stainless Tubing

1/4 Inch Pump Adaptor Compression

Fitting HP 1/4"x 1/4"PTC Used to connect 4 inch 4 nozzle mist ring to 1/4 high pressure tubing

3/8 Stainless Steel Tubing Compression Fitting End Cap

3/8 High Pressure End Cap Fitting for 3/8 Stainless Tubing